Tutorials 101
Important Matters Before Use
How to Charge the Battery
1. Place battery on base
2. Connect charger to battery
3. Connect charger to power outlet
4. Attach magnetic connector
5. Red = charging / Green = full
Remove magnetic connector FIRST after charging, then disconnect power.
How to Set Up Before Riding
1. Install foot bindings (optional)
2. Insert battery
3. Lock securely
4. Attach magnetic connector
5. Turn switch to first gear
Ensure system powers on before entering water.
System Check
1. Wear wrist band
2. Attach safety key
3. Press throttle
4. Confirm motor response
Always test the system on land BEFORE entering water.
How to Ride
1. Start lying down
2. Increase throttle slowly
3. Kneel → Stand
4. Lean to steer
Practice in calm water and stay within a safe distance.
Rear Fins Guide
• Beginners: DO NOT install
• Advanced riders: optional
Install fins only after mastering balance and control.
Cleaning After Use
1. Remove battery
2. Rinse with fresh water
3. Clean motor & compartment
4. Dry completely
Apply WD-40 to prevent corrosion after each use.
Need help? Our engineering team responds within 24 hours.
Contact Support
